Guides

Using RestoSketch.

Short, practical steps for scanning, editing, reports, backup and teams. The same guides are inside the app under Profile → RestoSketch Guides.

Getting started

Start a Project

Choose Smart Scan, Camera Measure, or Manual Sketch, then add the project details you want to keep with the job.

  1. From Home, choose New Project or Start Scanning.
  2. Choose Smart Scan for automatic capture and 3D detail, Camera Measure for guided wall measurements, or Manual Sketch for a drawn 2D project.
  3. Enter the customer and property details you want saved with the job.
  4. Start the first scan or manual sketch. RestoSketch creates the project record before you begin working.
  5. Return to Projects anytime to continue the job.

Smart Scan

Capture a room with LiDAR on a supported iPhone, then review walls and openings before saving.

  1. Create or open a project and start Smart Scan on a supported LiDAR iPhone.
  2. Hold steady briefly at the start so the room is ready to scan.
  3. Walk slowly around the perimeter and point the iPhone toward each wall, corner, door, window, and opening.
  4. Avoid quick turns and pause briefly anywhere the room outline still looks incomplete.
  5. Choose Review when the room outline looks complete; verify dimensions and detected openings before saving.
  6. If a scan is interrupted, look for the unfinished-scan recovery option before starting the room again.

Camera Measure

Build a measured 2D floor plan by marking each room corner with the camera.

  1. Choose Camera Measure and use the center target to mark each room corner.
  2. Hold the phone steady for a moment so the camera is ready.
  3. Aim the center crosshair at the floor/wall corner and tap Place First Corner.
  4. Move around the room and place each following corner. The next wall length is shown live before you place it.
  5. When you return to the first corner, close the room, give it a name and room type, then save it.
  6. Choose Measure Another Room to continue, or Finish Project to save and open the project page.
  7. Open the project from Projects any time to view its sketch, photos, notes, measurements and reports.

Build a Manual Sketch

Create an editable 2D floor plan from templates or freehand walls, then set exact dimensions.

  1. Choose Start New Project, then Manual Sketch.
  2. Enter the normal project and property details.
  3. Choose a premade Rectangle, Square, L-Shape, U-Shape, or Hallway, or start with a blank wall-by-wall room.
  4. Select a wall to enter an exact length. Connected walls update with the edited geometry.
  5. Use Add Room to create another shape or room and continue building the floor plan.
  6. Open Room Settings to rename a room, change its room type, or set the ceiling height.
  7. Save the sketch. Manual projects stay editable when you reopen them from Projects.

Add Another Room

Add a room to the same project. Reconnect to the previous scan when requested to preserve alignment.

  1. Open the saved scanned project.
  2. Choose Add Room (or Scan Next Room after review).
  3. RestoSketch asks you to reconnect to a previously scanned area so the new room stays aligned.
  4. Move around the previously scanned area until RestoSketch is ready.
  5. Walk into the new room, scan it, review it, and save it to the project.

Multi-Level Buildings & Stairs

Keep a basement, main floor and upper floors in one project.

  1. Open the saved project and choose Add a level for another floor, such as a basement or second floor. Press and hold a level to rename it.
  2. Rooms you scan next are added to the active level. Choose All levels to see the whole building.
  3. To show a stairway, open Edit, use the Label tool and choose the Stairs type. Add “90” to the name for a turning stair.
  4. Scanned stairs are drawn on their own level; a landing between two flights is named Landing.
  5. The PDF report starts each level with its own floor plan, followed by a Building Levels summary.

Choose a Smart Scan Mode

Choose the capture mode that matches a regular room, large building, or attic.

  1. Start Smart Scan and tap the scanning mode heading to choose a mode.
  2. Use Standard for most rooms and homes, including bedrooms with modest ceiling slopes.
  3. Use Large Building for long commercial scans; pause to verify protected sections before moving on.
  4. Use Attic / Pitched Ceiling for knee walls, unusual rooflines, and rooms with substantial slopes.
  5. The selected mode does not guarantee the sensor will identify every surface. Review the captured geometry.

Attics & Sloped Ceilings

Capture knee walls and sloped ceilings, and verify roof-pitch measurements.

  1. Choose Attic / Pitched Ceiling for steep slopes, knee walls, or changing ceiling heights.
  2. Capture each visible wall and the floor perimeter from more than one angle.
  3. Check low and peak heights, slopes, and any manual pitch values in room details.
  4. Confirm all roof pitch measurements in the field; they are not guaranteed by RoomPlan capture.
  5. Review the PDF before sending it, especially ceiling height labels and usable floor dimensions.

Tracking & Scan Recovery

Understand tracking warnings and recover without losing earlier work.

  1. If tracking quality drops, stop turning and point at a well-lit wall or corner that was already captured.
  2. Move slowly until alignment returns; avoid accepting walls that jump away from their real positions.
  3. Use the live protection tools if available before moving to another area.
  4. Review the current room before saving. If its geometry is substantially wrong, use Rescan This Room rather than accepting false measurements.
  5. Keep previously finished rooms and verify the draft or project backup before restarting a large job.

Scan Stops on Part of a Wall

Beams, ducts or tall block walls can stop a wall from extending. Work past it or finish the wall by hand.

  1. In block or concrete buildings, beams, ducts and the roof deck can hide the top of a wall, and the scan may stop extending it.
  2. Tap the floor button (Floor Follow) and aim at the line where the wall meets the floor. Keep walking along that line past the beam or duct. Tap it again when you are clear to return to the wall and ceiling.
  3. Floor Follow is an aiming guide. It does not guarantee the sensor will extend the wall, so check the outline as you go.
  4. Step back a few feet so more of the wall is in view, and pause on a clear corner for a few seconds.
  5. If the wall still will not continue, finish scanning the rest of the room and tap Review.
  6. Then open the project’s 2D tab, choose Edit Sketch, and add the missing wall by hand. Enter its length from a tape or laser measurement, and verify it before exporting the PDF.

Scan Photos

Automatically capture project photos during a scan and verify they were saved.

  1. Open Profile → App Settings and confirm automatic Scan Photos are enabled.
  2. Choose the photo coverage level you want.
  3. Scan the room normally. RestoSketch saves useful project photos as you move.
  4. Open Photos on the project page to review the scan photos.
  5. Check that every required image opens. Use Save All or the Files project folder to keep copies outside the gallery.
Equipment

Equipment Scan & Learning

Scan placed equipment, review it, and see it on the floor plan and in 3D.

  1. Open a Smart Scan project and tap Equipment under RestoSketch tools, then Scan Equipment.
  2. Point the camera at walls, corners or doorways from the original scan until RestoSketch reconnects.
  3. Walk slowly around each air mover, dehumidifier and air scrubber and keep the whole machine in view. Use Place by hand if one is missed.
  4. Tap Review, check the type and room of each unit, then Save Equipment.
  5. Open Equipment Placement to see the one-page plan. The same page is added to the floor plan PDF, and equipment shows in the Virtual Walkthrough (switch it from the menu or in Profile → Equipment Learning).
  6. Scans only find equipment you have taught. Turn on Equipment Learning in the Profile tab, use Teach RestoSketch, and teach a small and a large unit separately. Tap the pencil on a taught unit to name it, e.g. Small Air Mover. Teach in the same kind of room you will scan: the capture has three stages (walk around, move in close, step back) and also saves background photos so scans learn what is not equipment.
Projects and reports

Complete or Reopen a Project

Keep active work separate from finished jobs with Open, Completed, and All project views.

  1. Open Projects. Open is the default list for active jobs.
  2. Use Completed to view finished jobs or All to see both statuses together. Each project shows a pill: Open, Completed or Draft.
  3. To finish a job quickly, tap Complete on its row in the Projects list. Tap Reopen on a completed project to bring it back. You can also press and hold a project for the same option.
  4. Or open a project and tap the More options (…) button.
  5. Choose Mark project completed when the job is finished. The project moves into Completed without deleting any project data.
  6. If work resumes later, open the completed project and choose Reopen project.

Create a PDF Report

Generate a shareable report from the saved project information.

  1. Open the project and verify room geometry, openings, and customer details first.
  2. Choose the PDF/report export action.
  3. Check room names, measured dimensions, doors, windows, openings, and any attic heights or pitches against your field measurements.
  4. For multi-level projects, the report opens with a floor plan per level and a Building Levels summary, and ends with Measurements tables for doors, windows, openings, stairways and walls. Door, window and opening numbers match between the plans and the tables.
  5. Generate the PDF.
  6. Use the iOS share sheet to save, send, or print the finished report.
Storage and backup

Export / Back Up a Project

Check the accessible project folder, then make a separate backup before changing devices.

  1. Open the saved project.
  2. Open Storage & Backup to confirm the project copy is current, or choose a complete project export.
  3. The project folder in Files can contain Photos, Reports, and restorable Files. Exported ZIP contents depend on available saved data.
  4. Save a second copy to iCloud Drive, Google Drive, OneDrive / SharePoint, or another destination you control, and check its contents.
  5. Do not uninstall the app until you have verified an external backup. Local Files folders under the app can be removed when the app is deleted.

Where Projects Are Stored

Find the local project folders in Files and understand what a backup includes.

  1. Open Files on the iPhone, then On My iPhone → RestoSketch → Projects.
  2. Open a named project folder to find Photos, Reports, Files, and its backup manifest when available.
  3. Use Storage & Backup to choose an additional backup destination. Local project folders are not a substitute for off-device backups.
  4. If the project says photos are missing, the app may still have photo records but not the original image files.
  5. Never delete the app or erase the phone until an independent backup has been opened and checked.

Connect Cloud Storage

Connect supported iCloud Drive, Google Drive, OneDrive, or SharePoint storage.

  1. Open Profile → App Settings → Storage & Backup.
  2. Choose iCloud Drive, Google Drive, or OneDrive / SharePoint as the additional backup destination.
  3. For Google or Microsoft, tap Connect and finish account authorization when the provider is configured for this RestoSketch build.
  4. For SharePoint, choose the authorized document library after Microsoft sign-in.
  5. Select automatic or manual backup. Save a small test project, wait for completion, then inspect the remote Photos and Reports folders.
  6. A successful account connection alone does not prove a complete project backup exists.

Restore a Project

Restore a saved project copy only after checking which local files may be replaced.

  1. Open Profile → App Settings → Storage & Backup and choose the destination containing your saved project.
  2. Refresh the available backups and select the correct project and date.
  3. Review the restore confirmation. Replacing an existing local project can overwrite its current files.
  4. After restoring, open the project, its measurements, a PDF report and several photos to verify the copy.
  5. If files are missing, preserve the older backup and contact support before deleting anything.

Add RestoSketch Cloud

Buy a private drive, pick its size, and change or cancel it from My Account.

  1. Sign in at restosketch.com/account/ and open the RestoSketch Cloud card. Business drives are managed by the company owner or an administrator and shared by the whole team.
  2. Choose a size and pay $0.10 per GB each month ($5 minimum, $100 for 1 TB). Your drive is capped at the size you pay for.
  3. In the app, open Profile → App Settings → Storage & Backup to back up a project. Storage & Backup shows how much of your drive is used, and new backups pause if it is full. Your previous backup is never deleted to make room.
  4. To raise the size, choose a larger size and pay the share of the billing cycle that is left. It works as soon as it is paid. Lowering the size starts at the end of the billing cycle. You can change the size up to 2 times per billing cycle.
  5. To cancel, press Cancel Cloud in My Account. Billing stops, and your drive stays active through the end of the period you already paid for.
  6. After that, your files are kept for 30 more days so you can download them or add Cloud again. We email you at the start of that period and again with 7 days left. After 30 days they are permanently deleted. Your projects stay on your iPhone.

See and Download Your Cloud Files

Open your files from My Account, download PDF sketches, or delete a cloud copy.

  1. Sign in at restosketch.com/account/ and open Open your files on the RestoSketch Cloud card.
  2. Each backup also saves the project's PDF sketch. Turn on the PDF filter to see only PDFs, or choose Download PDFs to get them without opening the app.
  3. Business drives are grouped by worker. Each worker can delete their own projects, and company owners and administrators can delete anyone's.
  4. Deleting a project there removes only the cloud copy. The project stays on your iPhone.
  5. Support copies you send with Get Help are kept separately and for a limited time. They are free and do not count against your drive.

Share a Project With Support

Create a temporary 14-day project share for troubleshooting.

  1. Open the project and tap Get Help under RestoSketch tools. You can also use Get Help next to a project in Profile → App Settings → Storage & Backup.
  2. Pick what is wrong (for example a wall length, a missing door or the PDF) and describe it in your own words. Include the room name and the measurement you expected.
  3. Tap Send to Support. This shares a temporary 14-day copy of the project, and support sees your description beside your scan and sketch.
  4. Only files within the supported upload limits are included; check that important media is available locally.
  5. You do not need to email anything separately. Support is alerted when you send. Add screenshots by email to support@restosketch.com only if you want to.
  6. Support edits do not replace the original capture until an applicable correction is published and synced.

Missing or Unavailable Photos

Check whether the original image exists before attempting recovery.

  1. Open the affected project → Photos and confirm whether the images open.
  2. Check Files → On My iPhone → RestoSketch → Projects → the project → Photos for readable copies.
  3. If the photo list remains but the images are unavailable, metadata may exist without the original JPEG files.
  4. Look for a verified older backup in iCloud Drive or your selected cloud destination. Do not overwrite that backup.
  5. An unavailable photo cannot be recreated from its thumbnail or record. Preserve the project and contact support before deleting files.
Teams and accounts

Account & Team Access

Manage your account and see how Business team access works.

  1. Open Profile → App Profile → Account & Team to check your sign-in, plan and Business membership.
  2. Open restosketch.com/account/ to manage account details. Company team and billing controls are intended for owners and admins; employees see their assigned access.
  3. If a plan upgrade or renewal does not appear, refresh account status and contact support before paying again.
  4. Do not share passwords, verification codes, or payment information with support.

Invite a Business Team Member

Send a private, email-specific invitation or use an existing team code for an eligible new worker.

  1. As a Business owner or admin, open Account → Manage Business Team in the app, or Your Team in the website account portal.
  2. Enter the worker's email address and create an invitation. The private link expires after seven days and can be used once.
  3. Send the invitation using the email draft or share link. The message is not automatically emailed by the app.
  4. The worker opens the link, signs in or creates an account with the invited email address, and accepts the invitation.
  5. The existing Business Team Code remains an alternative for eligible new workers. A removed worker needs a fresh personal invitation rather than reusing the old code.
  6. Check the team roster and available device slots after the worker signs in on the iPhone.

Manage Roles & Devices

Owners and admins can review team members, roles, and registered devices.

  1. Sign in as a Business owner or admin and open Manage Business Team in the app or Your Team at restosketch.com/account/.
  2. Review the worker's name, email, role and registered devices before making a change.
  3. Use the role selector where permitted to assign Admin, Supervisor, Lead Technician or Technician. The Business owner role cannot be reassigned.
  4. Use Remove Worker on the website or Revoke Access for that worker's device in the app. Confirm carefully: removal revokes the worker's entire Business seat and company devices, not just one phone.
  5. A removed worker keeps their personal RestoSketch account and any separately purchased subscription. Existing local project files are not remotely erased.
  6. A removal takes effect at the server; a phone already offline may not display the change until it reconnects. A manager can send a new invitation to restore access.

Business Billing & Privacy

Understand who manages company billing and what changes when a worker leaves a team.

  1. Business owners and admins manage company subscription details, renewal dates and billing history from the website account portal.
  2. Supervisors, Lead Technicians, Technicians and other non-manager team members should see only their own access status, not the company's billing controls.
  3. Removing a worker revokes Business access. It does not cancel the organization's shared Business subscription or a worker's separate Individual Pro purchase.
  4. If your organization changes administrators, verify manager permissions before sharing billing or customer information.
  5. For a billing discrepancy, contact support with the account email and charge date—never send complete card numbers or passwords.
Automatic capture does not replace field measurements. Verify room areas, door and window widths and any attic heights or pitches before sharing a report. Need more help? Contact support.